MB-1 Indoor/Outdoor Wireless Dog Fence

DogWatch Indoor Pet Fences emit a radio signal that is detected by the receiver collar worn by your pet—the same way the outdoor hidden fence systems work. As your pet approaches the signal field (initially marked with a series of flags to help your pet identify the area), the receiver collar begins to emit an audible (or vibration) warning beep. If your pet goes beyond the warning zone, the warning is quickly followed by a mild ‘correction’—an unpleasant, but safe, sensation from the receiver collar. With proper training, your pet will quickly learn to stay away from areas that he associates with the warning.

The status light on the transmitter lets you know if the transmitter is turned on.

On the MB-1, the status light also lets you know the status of the transmitter battery. If the light is red, the battery needs to be charged. See Owner’s Guide for additional information.

Note: The green light may be steady green or blinking green. This depends on the frequency setting of the transmitter.

On the back of the transmitter, there is a signal range knob.

1. Turn the knob toward the ‘+’ to increase the signal range. This increases the size of the signal field.
2. Turn the knob toward the ‘-’ to decrease the signal range. This decreases the size of the signal field.

You do not need separate collars. Use the same collar inside and outside.

The battery life of the MB-1 is determined, in part, by the rate setting and the range setting you select. The rate setting determines how frequently the signal is transmitted (fast, medium or slow.) The range setting is the distance the signal radiates from the transmitter. (See Owner’s Guide for additional information.)

When set at maximum range, the life of the battery charge is approximately:

1. 4 days in ‘Fast’
2. 7 days in ‘Medium’
3. 30 days in ‘Slow’

Decreasing the range setting will increase the average battery life between charges.

The MB-1 can be adjusted up to a maximum of 8 feet in diameter (4 feet in all directions from the transmitter.)

Important: Do not set the transmitter on or near large metal objects.